©

Cart/

Code Guide

  1. When the program starts, the robot moves forward with the gripper open. (Going to collect object)
  2. When the hand is placed above IR sensor robot must stop and close the gripper. (Collecting object)
  3. When the hand is raised again robot moves forward with the closed gripper. (Moving with collected object)
  4. When the hand is placed above the IR sensor again, the robot stops and opens the gripper. (Dropping object)
  5. Return to 1.
Pseudocode:

on start
    close gripper

loop

    read IR sensor value

    if IR == LOW

        turn off motors

        if gripper is open
          close griper
        else if gripper is closed
          open gripper

        wait 3 seconds

else

        turn on motors

end if;

end loop;